TP-LINK Archer BE700
TP-LINK Archer BE700 Pro (v1.6)
Availability: now
Manuf (OEM/ODM): Proware
FCC approval date: 02 June 2024
(Est.) release date: 24 November 2024
(Est.) initial retail price (in USD): $400
UPC: 810142820875 (UPC DB, On eBay)
Country of manuf.: China
Series: BE15000
Type: wireless router
FCC ID: 2BCGWBE700
PCB ID: 202401052BE700DVT
Power: 12 VDC, 3.3 A
Connector type: barrel
CPU1: Broadcom BCM6765 (2.0 GHz, 4 cores)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (ESMT F50L1G41LB-104)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Micron MT40A512M16)
Expansion IFs: USB 3.0
USB ports: 1
Serial: yes, 4-pin header
WI1 chip1: Broadcom BCM6765
WI1 802dot11 protocols: abgn+ac+ax+be
WI1 MIMO config: 2x2:2
WI1 antenna connector: MHF4
WI2 chip1: Broadcom BCM67263
WI2 802dot11 protocols: an+ac+ax+be
WI2 MIMO config: 4x4:4
WI2 antenna connector: MHF4
ETH chip1: Broadcom BCM6765
ETH chip2: Broadcom BCM50901E
Switch: Realtek RTL8367SC
LAN speed: 3x 1GbE + 1x 2.5GbE
LAN ports: 4
WAN speed: 10GbE
WAN ports: 1
abgn+ac+ax+be
Flags: Wi-Fi 7, 4K-QAM, BW320, Multi-Link Operation, Multi-RU
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
BE15000 Tri-Band Wi-Fi 7 Router
"202401052BE700DVT" and "Rev1.0sp1" is silkscreened on the board.
Variants
Product description:
- BE15000 Tri-Band Wi-Fi 7 Router, BE11000 Tri-Band Wi-Fi 7 Router
Type designation:
- Archer BE700, Archer BE700 Pro, Archer BE11000 Pro
Note: All versions of the Model: Archer BE700, BE700 Pro and BE11000 Pro
- are electrically equal except the following difference:
- The only difference between the models is in the design of the RJ45 port.
- Other designs (including hardware and software) are the same.
- BE700 with 1Gbps ports, BE700 Pro and BE11000 Pro with 10Gbps port.
- BE11000 Pro has the different model and product name from BE700 Pro,
- others are exactly the same.
Models
- TP-LINK Archer BE230 • BE3600 Dual-Band Wi-Fi 7 Router
- TP-LINK Archer BE3600 • BE3600 Dual-Band Wi-Fi 7 Router
- TP-LINK Archer BE400 • BE6500 Dual-Band Wi-Fi 7 Router
- TP-LINK Archer BE550 • BE9300 Tri-Band Wi-Fi 7 Router
- TP-LINK Archer BE550 Pro • BE9700 Tri-Band Wi-Fi 7 Router
- TP-LINK Archer BE700 • BE15000 Tri-Band Wi-Fi 7 Router
- TP-LINK Archer BE800 • BE19000 Tri-Band Wi-Fi 7 Router
- TP-LINK Archer BE805 • BE19000 Tri-Band Wi-Fi 7 Router
- TP-LINK Archer BE900 • BE24000 Quad-Band Wi-Fi 7 Router
- TP-LINK Archer GE550 • BE9300 Tri-Band Wi-Fi 7 Gaming Router
- TP-LINK Archer GE650 • BE11000 Tri-Band Wi-Fi 7 Gaming Router
- TP-LINK Archer GE800 • BE19000 Tri-Band Wi-Fi 7 Gaming Router
Serial
| • UART shell outputs • >> |
|---|
The line below, default_support_password=Support!, suggests :there may be a backdoor for "support". I could be wrong. version U-Boot 2019.07 (May 29 2024 - 09:34:57 +0800), Build: 50404p2@450432 aarch64-linux-gcc.br_real (Buildroot 2021.02.4) 10.3.0 GNU ld (GNU Binutils) 2.36.1 mtdparts device nand0 <spi1.0>, # parts = 4 #: name size offset mask_flags 0: loader 0x00200000 0x00000000 0 1: image 0x07280000 0x00200000 0 2: tpconfig 0x00380000 0x07480000 0 3: userconfig 0x00700000 0x07800000 0 active partition: nand0,0 - (loader) 0x00200000 @ 0x00000000 defaults: mtdids : nand0=spi1.0 mtdparts: spi1.0:2097152(loader) coninfo List of available devices: serial0 00000007 IO stdin stdout stderr serial 00000003 IO bdinfo arch_number = 0x0000000000000000 boot_params = 0x0000000000000000 DRAM bank = 0x0000000000000000 -> start = 0x0000000000000000 -> size = 0x0000000040000000 baudrate = 115200 bps TLB addr = 0x000000003ffe0000 relocaddr = 0x000000003fdb0000 reloc off = 0x000000003edb0000 irq_sp = 0x000000003dd9e050 sp start = 0x000000003dd9e050 Early malloc usage: f00 / 8000 fdt_blob = 0x000000003dd9e060 mmcinfo Card did not respond to voltage select! printenv IMAGE=NAND:2M,1024M MCB=0xc0121535 boardid=TPBE700SP2 bootargs_append=cma=52M bootcmd=printenv;run once;sdk boot_img bootdelay=1 bufmem=128M default_support_password=Support! default_user_password=User! dhd0=11 env_boot_magic=16384@0x80000,0x140000,0x1a0000 ethact=systemport@0x80210000 ethaddr=68:7F:F0:08:D6:7B fdtaddr=7f73000 fdtcontroladdr=3dd9e060 filesize=4 ipaddr=192.168.0.1 mtdids=nand0=spi1.0 mtdparts=spi1.0:2097152(loader),120061952@2097152(image), 3670016@122159104(tpconfig),7340032@125829120(userconfig) netmask=255.255.255.0 nummacaddrs=10 once=true rnrmem=13 rootfs_opts=root=/dev/ubiblock0_4 ubi.mtd=image ubi.block=0,4 rootfstype=squashfs stderr=serial0 stdin=serial0 stdout=serial0 Environment size: 702/8188 bytes pinmux list | Device | Driver | Parent | pinctrl | bcmbca_pinctrl | periph showvar showvar HUSH_VERSION=0.01 |
