HiWiFi HC6361

HiWiFi HC6361
Availability: China only ?

(Est.) release date: 2013
Country of manuf.: China

Amazon image

ASIN
B00E93Z720 (, On Amazon, On CCC)

Type: wireless router

Power: 5 VDC, 1 A
Connector type: USB Female Micro-B

CPU1: Atheros AR9331 (400 MHz)
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Spansion S25FL128SAIF00)
FLA2: 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (Micron MT29F32G08CBACA)
RAM1: 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix H5DU5162ETR-E3C)

Expansion IFs: none specified
Serial: yes, (115200,8,N,1)

WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Atheros AR9331
LAN speed: 100M
LAN ports: 2
WAN speed: 100M
WAN ports: 1

bgn

Additional chips
NAND Flash (32 Gb);Micron;MT29F32G08CBACA;29F32G08CBACA;1;
USB 2.0 Flash Disk controller;SkyMedi;SK6226;SK6226, BAPMC4, A1317, S6A432.2;1;

Stock FW OS: Linux 3.10.36

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Default SSID: HiWiFi_XXXXXX
Default IP address: 192.168.199.1
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 0 are HiWiFi devices

802dot11 OUI: D4:EE:07
Ethernet OUI: D4:EE:07

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

Product page (CN)

• HiWiFi HC6361 on OpenWrt Wiki (pictures)

The Xtal frequency is 25MHz.

Additional storage (4 GB per the shown MT29F32G08CBACA NAND) is available

to the device via the on-board SK6226 USB 2.0 (High-Speed) Flash controller.

OpenWrt based Source Code https://code.hiwifi.com/, note that is not original firmware.

Checkout code need register.

See also HiWiFi HC5661/HC5663/HC5761/HC6361..

Images

• external
• 

  external shot on top of a TP Edge

• 

  accessing it's shell via the serial, still on the Edge

• 

  bottom of the unit (Made in China)

• 

  with its box

• internal
• 

  board top

• 

  board top, annotated

• 

  three pads, used later

• 

  board bottom

• 

  UART test pads (TP1 + TP2)

• 

  PL2303 dongle used

• 

  UART setup finished (board -> PL2303 -> ext. USB data lines)

• 

  16 MB NOR Flash chip

• 

  partially in of case