Cisco Meraki MR26

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Cisco Meraki MR26 -HW
Availability: EoL (05/09/2023)

FCC approval date: 29 January 2014
(Est.) release date: March 2014
Country of manuf.: Taiwan

Amazon image

ASIN
B00ISCJ382 (Flag of the United States.svg, On Amazon, On CCC)

Type: managed access point

Power: 12 VDC, 1.5 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.5 mm (ID), 9.5 mm (LEN)
PoE tag: 802.3af/at, standard

CPU1: Broadcom BCM53015 (800 MHz, 2 cores)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Spansion S34ML01G100TF100)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SK hynix H5TQ1G63EFR-H9C)

Expansion IFs: none specified
JTAG: yes, 20-pin header, unpopulated, J5
Serial: yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), J3

WI1 chip1: Broadcom BCM43431
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM43431
WI2 chip2: Broadcom BCM43428
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL

ETH chip1: Broadcom BCM53015
LAN speed: 1GbE
LAN ports: 1

abgn

Additional chips
2.4GHz High Power Wireless LAN Power Amplifier;Skyworks;SE2604:;;3;
2.4GHz Low-Noise Amplifier;Skyworks;SKY65405-21;;3;
5GHz 23dbM Power Amplifier w/ Power Detector;Skyworks;SE5003L;;3;
0.5-6.0 GHz SPDT Switch;Skyworks;SKY13370-374LF;;3;
0.5-6.0 GHz SPDT Switch;Skyworks;SKY13377-324LF;;3;
802.3at PoE Interface and DC/DC Controller;TI;TPS23754;;1;
64-Kbit Serial I2C bus EEPROM;STMicro;24C64WP;;1;
3 Channel 16bit PWM Constant Current Driver;Numen Tech;NU801;;1;
2Kbit I2C Serial EEPROM w/ Security Register;Microchip;AT24CSW027;;1;
Zero Drift Bidirectional Current/Power Monitor w/ I2C IF;TI;INA219;;1;
N+1 and ORing Power Rail Controller;TI;TPS2412;;1;
30V 17A N-Channel MOSFET;SinoPower;SM4388;;1;
30V 23A N-Channel MOSFET;Alpha & Omega;AO4302;;1;
20V Dual P+N-Channel MOSFET;Alpha & Omega;AO4622;;2;
80V N-Channel/P-Channel Power MOSFET;Rohm;SH8M41;;4;
6V 3A Synchronous Step Down Converter;TI;TPS5432;;1;
17V 8A Synchronous Step Down Converter w/ Hiccup;TI;TPS54821;;1;
High Isolation Voltage Photocoupler;Renesas;PS2801-1;;2;
1-Channel Photocoupler;LiteOn;LTV-817;;1;

Stock bootloader: U-Boot 2012.10 00063-g83f9fe4

Stock FW OS: Linux 3.4 -r23

802dot11 OUI: 00:18:0A (10 E, 8 W)
Ethernet OUI: 00:18:0A (10 E, 8 W)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


802.11n Dual-Radio Dual-Band Wireless Indoor Access Point

Two dual-band 3x3 MIMO 802.11n radios and 1x1 dual-band WIFI dedicated to scanning.

Hardware specification

Dual-Core ARM (Cortex-A9)
  • Memory: 128MB (DDR3) SDRAM
  • Storage: 128MB (SLC NAND) Flash
  • WiFi: 2x Broadcom BCM43431 802.11abgn (3x3:3)
Broadcom BCM43428 802.11abgn (1x1:1)
  • Network: 1x Gigabit Ethernet ports
  • Power: 12V, 1.5A via barrel or 802.3at PoE

See also

Images