Belkin F9K1102 v1
Jump to navigation
Jump to search
Belkin F9K1102 v1
Manuf (OEM/ODM): Arcadyan WG8016G22 -AK
FCC approval date: 02 March 2011
(Est.) release date: 11 April 2011
UPC: 722868817865 (UPC DB, On eBay)
Country of manuf.: China
Type: wireless router
FCC ID: K7SF9K1102V1
IC ID: 3623A-F9K1102V1
PCB ID: 141801620000J
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM5358UB0 (530 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406EM2I-12G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM6AB160TSC-5G)
Expansion IFs: USB 2.0
USB ports: 1
JTAG: yes, J2, unpopulated, 14-pin header
Serial: yes, internal, 4-pin header, populated, 3.3V TTL
WI1 chip1: Broadcom BCM5358UB0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM43236
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM5358UB0
Switch: Broadcom BCM5358UB0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
abgn
Additional chips
Voltage Regulator;Zilltek;LV1484S;;1;
Voltage Regulator;Zilltek;LV1482S;;1;
Stock bootloader: CFE
Stock FW OS: Linux 2.6.22
Default SSID: belkin.XXX (20 addl. devices)
, belkin.XXX.5GHz (5 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 297 additional devices
of which 97 are Belkin devices
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Belkin F9K1102 v1 | Broadcom | Broadcom | Broadcom |
| Belkin F9K1102 v2 | Realtek | Realtek | Realtek |
| Belkin F9K1102 v3 | Broadcom | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
N600 DB Wireless Dual-Band N+ Router
A triangular RoHS logo / indicator and "P/N: 141801620000J R01"
- is silkscreened on one F9K1102v1's board (date code 1107).
The USB ID of the on-board BCM43236 is 0a5c:bd17.
The default SSID pattern is belkin.XXX (and also [probably] belkin.XXX.5GHz) where XXX
- is the last three hex digits of the wireless interface MAC address (lower case letters).
An example SSID is belkin.548 where the WLAN MAC is 08:86:3B:90:35:48.
Forum threads
Serial
Pinout
J3 (GND) (RxD) (TxD) [3.3v]
Info derived from
| • boot log • >> |
|---|
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found a 8MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps
Ethernet Controller 5.60.127.10
CPU type 0x19749: 530MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x807A1470 (660592)
Data: 0x80736FC0 - 0x8073A1E0 (12832)
BSS: 0x8073A1E0 - 0x8073B470 (4752)
Heap: 0x8073B470 - 0x8079F470 (409600)
Stack: 0x8079F470 - 0x807A1470 (8192)
Text: 0x80700000 - 0x80736FBC (225212)
Copying boot params.....
DONE
Bootloader version v0.07 boot_version v0.07
Project name : WG8016G22-AK
Press space bar to cancel startup...
Device eth0: hwaddr 94-44-52-F7-72-BD,
ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ....... 4216048 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (titan_liu@SW3SRV2.arcadyan.com.tw)
(gcc version 4.1.2) #5 Mon Jul 4 12:52:21 CST 2011
CPU revision is: 00019749
Found a 8MB ST compatible serial flash
wombo_reset set to gpio 22
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists. Total pages: 16256
Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU: BCM5357 rev 1 at 530 MHz
Using 265.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60336k/65536k available (2801k kernel code, 5144k reserved, 1138k data, 176k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: no core
PCI: Fixing up bus 0
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
gpio_init 156
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered (default)
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
pflash: found no supported devices
sflash: squash filesystem with lzma found at block 1715
Creating 4 MTD partitions on "sflash":
0x00000000-0x00030000 : "boot"
0x00030000-0x007f0000 : "linux"
0x001acdb0-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
usbmon: debugfs is not available
GACT probability on
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
BCM fast NAT: INIT
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 176k freed
Warning: unable to open an initial console.
Failed to execute /init
Algorithmics/MIPS FPU Emulator v1.5
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
insmod: emf.ko: no module by that name found
insmod: igs.ko: no module by that name found
insmod: bcm57xx.ko: no module by that name found
insmod: usbcore.ko: no module by that name found
wl1 is up in 0 sec
Hit enter to continue...vlan2: Operation not supported
eth1: Operation not supported
eth1: Operation not permitted
eth1: Operation not supported
eth1: Invalid argument
wlconf: PHYTYPE: 4
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
eth1: Invalid argument
eth1: Invalid argument
wlconf: PHYTYPE: 4
eth2: Invalid argument
eth2: Operation not supported
eth2: Invalid argument
eth2: Invalid argument
HTTPD: main(1010)
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
mkdir: cannot create directory '/tmp/mnt': File exists
mkdir: cannot create directory '/tmp/etc': File exists
mkdir: cannot create directory '/tmp/etc/sysconfig': File exists
Starting HotPlug: /usr/sbin/hotplugd -D -f
Starting jcpd daemon: /usr/sbin/jcpd
insmod: cannot insert '/lib/modules/2.6.22/kernel/drivers/usb/host/ehci-hcd.ko': Invalid parameters (17): Invalid argument
share memory key=74565 successful id on creating=32769
original zone=GMT+8
modified dst=GMT
udhcpd_main(138): udhcp server (v0.9.8) started
ut->en 1
ut->override_iconv_err 0
ut->xbox360 1
ut->dlna_enabled 1
ut->dlna_backup_ignore 0
Error: no content directory to be shared.
ushare_free...
UPnP daemon is ready to run
udhcpd_main(138): udhcp server (v0.9.8) started
read_conf_data(133): dhcp_client_list_num :[2]
[start_wan 1157], ifconfig vlan1 up
vlan1: Operation not supported
udhcpc_main(438): udhcp client (v0.9.8) started
original zone=GMT+8
modified dst=GMT
vlan1 dhcp
vlan1: No such process
Stop DDNS service!
Hit enter to continue...connect: Network is unreachable
Hit enter to continue...Starting Samba: /usr/sbin/smbd -D
/usr/sbin/nmbd -D
Setting SSID: "belkin.2bd"
main(1216) wl -i eth1 ssid -C 10 belkin.2bd
Setting SSID: "belkin.2bd.5GHz"
main(1228) wl -i eth2 ssid -C 15 belkin.2bd.5GHz
start_wl(1014) reStart the Wireless, lan_ifNames=vlan2 eth1 eth2
start_wl(1073), vlan2 start up
start_wl(1075), eth1 start up
start_wl(1078), eth2 start up
Starting sxuptpd
Initializing USB port mode:
port1 = NAS
port2 = NAS
Starting usbjcpd
Hit enter to continue...
|
wl revinfo
| • wl revinfo |
|---|
# wl -i eth1 revinfo vendorid 0x14e4 deviceid 0x4329 radiorev 0x52057000 chipnum 0x5357 chiprev 0x1 chippackage 0x8 corerev 0x1c boardid 0x550 boardvendor 0x14e4 boardrev P200 driverrev 0x53c7f0a ucoderev 0x256013e bus 0x0 phytype 0x4 phyrev 0x9 anarev 0x0 # wl -i eth2 revinfo vendorid 0x14e4 deviceid 0x4346 radiorev 0x72057000 chipnum 0xa8e4 chiprev 0x2 chippackage 0x4 corerev 0x18 boardid 0x521 boardvendor 0x14e4 boardrev P113 driverrev 0x53c7f0a ucoderev 0x256013a bus 0x0 phytype 0x4 phyrev 0x9 anarev 0x0 |
cat /proc/mtd
# cat /proc/mtd dev: size erasesize name mtd0: 00030000 00010000 "boot" mtd1: 007c0000 00010000 "linux" mtd2: 00643250 00010000 "rootfs" mtd3: 00010000 00010000 "nvram"
cat /proc/cpuinfo
# cat /proc/cpuinfo system type : Broadcom BCM5357 chip rev 1 processor : 0 cpu model : MIPS 74K V4.9 BogoMIPS : 264.60 wait instruction : no microsecond timers : yes tlb_entries : 64 extra interrupt vector : no hardware watchpoint : yes ASEs implemented : mips16 dsp VCED exceptions : not available VCEI exceptions : not available unaligned_instructions : 5 dcache hits : 2147483648 dcache misses : 1507655552 icache hits : 2147483648 icache misses : 3621731325 instructions : 2147483648
lsmod
| • lsmod |
|---|
# lsmod Module Size Used by Tainted: P usb_storage 45296 0 jcp_cmd 8160 0 jcp 13056 1 jcp_cmd sxuptp_driver 4672 0 sxuptp_usbmode 5296 0 sxuptp 57936 3 jcp_cmd,sxuptp_driver,sxuptp_usbmode ohci_hcd 26384 0 wl_high 1153376 0 ehci_hcd 45024 0 wl 2323760 0 et 59328 0 ctf 15712 0 |
netstat -l
| • netstat -l |
|---|
# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:9090 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:netbios-ssn 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:http 0.0.0.0:* LISTEN tcp 0 0 router.belkin:1780 0.0.0.0:* LISTEN tcp 0 0 router.belkin:10101 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:microsoft-ds 0.0.0.0:* LISTEN netstat: no support for 'AF INET6 (tcp)' on this system udp 0 0 localhost.localdomain:40064 0.0.0.0:* udp 0 0 0.0.0.0:37000 0.0.0.0:* udp 0 0 router.belkin:netbios-ns 0.0.0.0:* udp 0 0 192.168.169.1:netbios-ns 0.0.0.0:* udp 0 0 0.0.0.0:netbios-ns 0.0.0.0:* udp 0 0 router.belkin:netbios-dgm 0.0.0.0:* udp 0 0 192.168.169.1:netbios-dgm 0.0.0.0:* udp 0 0 0.0.0.0:netbios-dgm 0.0.0.0:* udp 0 0 localhost.localdomain:38032 0.0.0.0:* udp 0 0 localhost.localdomain:40100 0.0.0.0:* udp 0 0 localhost.localdomain:domain 0.0.0.0:* udp 0 0 router.belkin:domain 0.0.0.0:* udp 0 0 192.168.169.1:domain 0.0.0.0:* udp 0 0 localhost.localdomain:40000 0.0.0.0:* udp 0 0 0.0.0.0:bootps 0.0.0.0:* udp 0 0 0.0.0.0:bootps 0.0.0.0:* udp 0 0 localhost.localdomain:37064 0.0.0.0:* udp 0 0 0.0.0.0:49235 0.0.0.0:* udp 0 0 0.0.0.0:19540 0.0.0.0:* udp 0 0 0.0.0.0:19541 0.0.0.0:* udp 0 0 0.0.0.0:39000 0.0.0.0:* udp 0 0 localhost.localdomain:40040 0.0.0.0:* udp 0 0 0.0.0.0:1900 0.0.0.0:* udp 0 0 0.0.0.0:38000 0.0.0.0:* netstat: no support for 'AF INET6 (udp)' on this system raw 0 0 0.0.0.0:2 0.0.0.0:* 7 netstat: no support for 'AF INET6 (raw)' on this system Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path |
ps w
| • ps w |
|---|
# ps w
PID Uid VSZ Stat Command
1 root 2624 S /sbin/preinit
2 root SW< [kthreadd]
3 root SWN [ksoftirqd/0]
4 root SW< [events/0]
5 root SW< [khelper]
30 root SW< [kblockd/0]
31 root SW< [ksuspend_usbd]
34 root SW< [khubd]
55 root Z [swapper]
58 root SW [pdflush]
59 root SW [pdflush]
60 root SW< [kswapd0]
61 root SW< [aio/0]
86 root SW< [mtdblockd]
348 root 1860 S syslogd -C
351 root 4172 S httpd
353 root 1404 S /usr/sbin/dnsmasq -n -i br0 -i br1 -r /tmp/resolv.conf
355 root 4172 S httpd
357 root 9328 S upnp -D -W vlan1
384 root 1792 S /bin/eapd
387 root 2280 S nas
391 root 3060 S /bin/wps_monitor
394 root 1428 S igmp vlan1
421 root 1856 S lld2d br0
445 root 1512 S /usr/sbin/hotplugd -D -f
446 root 1512 S /usr/sbin/hotplugd -D -f
453 root 1540 S /usr/sbin/jcpd
454 root 1512 S /usr/sbin/hotplugd -D -f
473 root 2384 S /usr/sbin/ledd
498 root 2432 S /usr/sbin/portrd
500 root 2392 S /usr/sbin/usb_wlc_status
502 root 2616 S /sbin/guestchk
504 root 2376 S reset_button
519 root 2164 S udhcpd /tmp/udhcpd0.conf
543 root 2160 S udhcpd /tmp/udhcpd1.conf
571 root 2140 S udhcpc -i vlan1 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
590 root 6552 S /usr/sbin/smbd -D
608 root 6184 S /usr/sbin/nmbd -D
610 root 6552 S /usr/sbin/smbd -D
616 root SW< [sxuptp-wq]
617 root SW [sxuptp-ka]
629 root SW [jcpcore]
640 root 2396 S /usr/sbin/wanstatus
642 root 11076 S /usr/bin/belkin_wan_cfg
644 root 2608 S /sbin/acscher
649 root 2068 S /sbin/ulogd -d
872 root 1848 S /bin/sh
2330 root 1844 S sh -c rm -f /tmp/wanup
2331 root 1848 R rm -f /tmp/wanup
2332 root 1848 R ps w
|
nvram dump
