Atheros WiFi Support
Jump to navigation
Jump to search
802.11n
| Chipset | Chips used |
Adapters | MIMO config |
HT20 | SGI HT20 |
HT40 | SGI HT40 |
WoW | Spectral scan |
STBC Rx/Tx |
|---|---|---|---|---|---|---|---|---|---|---|
| AR9280 | 19 devices | 2x2:2 | yes | no | yes | yes | yes (up 2.rev?) |
yes, 8bit | 1/1 | |
| AR9285 | 32 devices | 1x1:1 | yes | no | yes | yes | yes | yes, 8bit | 1/0 | |
| AR9287 | 15 devices | 2x2:2 | yes | yes | yes | yes | yes | yes, 8bit | 1/1 | |
| AR9271 | 47 devices | 1x1:1 | yes | yes | yes | yes | no | no | 1/0 | |
| AR9462 | 19 devices | 2x2:2 | yes | yes | yes | yes | yes | yes, 8bit | 1/1 |
Fields
Following fields are used or may be of interest:
- - HT20 - 20 MHz mode.
- - SGI HT20 - Short guard interval for 20 MHz mode. Not all chips support it.
- - HT40 and SGI HT40 - 40 MHz mode...
- - WoW - Wake on Wireless - If it is supported by the chip it does not mean it was enabled by the vendor.
- - Spectral scan - allow using this chip for spectral scanning, not enough for "sintifik" work, but good for troubleshooting.
- - STBC Rx/Tx - Space-Time Block Coding is used to reduce data loss. Rx - means it can receive an STBC stream.
- Tx - it can send an STBC stream. Number (Nss) is used to show the number of parallel data streams which can be sent or received with STBC.
